نتایج جستجو برای: Gypsum mortar
تعداد نتایج: 9277 فیلتر نتایج به سال:
Abstract Gypsum and gypsum mortar are among the most sophisticated and unique traditional building materials of Iran that over the past two thousand years, by varying the strength properties as well as the gypsum mortar retention time, gypsum plaster artists have created diverse works with different techniques as architectural arrays, sometimes by decreasing or increasing the ratio of the wa...
Cement is produced by co-grinding clinker, gypsum and other components defined in the Cement Standards like limestone, pozzolans, fly ash and slag. The grinding is usually performed in horizontal ball mills. Gypsum is typically the basic source of sulphates (SO3) in the cement. The effect of gypsum on the cement quality is critical and twofold. It affects two of the main properties of this prod...
Investigation of gypsum-based historical materials has two main problems: philological problems and technical issues. Technical issues, the main topic of this article, are normally consequences of physicochemical complexity of gypsum crystals in different conditions and variety of additives or mixed materials. Neglecting this technical problem, leads researchers to misunderstand or misinterpret...
Glass fiber reinforced gypsum composites are new building materials that have been used in covering interior walls. Reinforcement by means of woven fabrics as a three dimensional material is an alternative to the use of short fibers. The application of appropriate fabrics can improve mechanical properties of gypsum composites. The aim of this research article is to investigate the effect of the...
Mortars with mud, gypsum and lime as binder have, since ancient times, been used for very different applications. The characterisation of these historic mortars was until 1970–1980 mostly based on traditional wet chemical analyses but the interpretation of these results is difficult and often impossible without a good knowledge of the nature of the different mortar components. More recently dev...
A Review of the Structure, Application, Production Process and Effect Additives in Traditional Gypsum Mortar
Abstract Fly ash (FA) is pozzolanic, while blast furnace slag (GGBS) latent hydraulic. These two materials react slowly in the presence of water to harden. Adding an alkali activator such as strong hydroxide could boost hardening process, but safe handling highly corrosive primary concern. Therefore, present work prescribed various types gypsum activate FA and GGBS a binder phase for making mor...
The present work describes the viability of a mortar binder based on two industrial by-products: poly(vinyl chloride) (PVC) particles from scrap and anhydrite (CaSO4) from fluorgypsum. Mortar composites were made incorporating different amounts of PVC particles and cured at constant room temperature during various periods of time. From X-ray diffraction, it was possible to follow the hydration ...
With regard to the dry climatic conditions of Iran, cob and gypsum mortars were used in architectural arrays of many regions of Iran, to create the scratch coat (Arriccio) and fine coat (Intonaco) in the historical periods. The thickness of the fine coat was often very low (one-two mm). In this regard, one of the examples is the City of Yazd. One of the buildings made in the eighth century (Isl...
In order to evaluate environmental controls on the soiling formation and decay of building stones a set of mapping and physical and chemical analyses were carried out on granite from a historical church in the polluted centre of Rio de Janeiro. These techniques highlight the increasing of threatening damage on generally perceived as a durable building material, caused by granular disaggregation...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید